|
|
 |
|
|
|
|
|
|
|
|
Input channels 1
and 2
When using input channels 1&2 yo have the choice between phono
inputs with a sensitivity of 5.2mV and built-in RIAA correction
or line
inputs with a sensitivity of 500mV (to connect different equipment
such as a CD-player, MP3 player, tuner, tape player, mini disc,
video player, etc...)
If you are using the phono inputs and the record player has a ground
wire, it can be connected to the ground.
After connecting the music-sources you can select the phono or line
input for each channel using the select-switch.
By switching the VU
select switch to input (the led will light up), the input signal
of channel 1 will appear on the left VU-meter and the signal of
channel 2 on the right VU-meter. This is very useful to compare
the level of both signals.
Adjust with the level
control the input signal so that the yellow indicators of the
level meters light up occasionally.
By switching the channel
routing switch from the upper position (STRAIGHT) to the lower
position (REVERSE) you can direct the signal from channel 1 to channel
2 and vice versa.
|
|
|
