|
| STANDARD FEATURES
|
 | 10 inch width - 9 units - mixing panel. | |
| Front- and top-panel in elegant matt silver paint. | |
| Aluminium anodised smooth scratchplate, no obstructions by any paint of text print on the panel. | |
| Front-handles to carry the mixer and to avoid unwanted moving of the buttons during use and during connection of the mixing panel. | |
| Same height as the Technics famous SL-1200/1210 turntables. | |
| 4 Input channels
| - | 2 Phono inputs on gold plated RCA connectors. |
| - | 4 Line inputs CH1 + CH2 + CH3/FX-return + CH4/Session/Backtape-in. |
| - | 1 Microphone input on COMBO (XLR-JACK) connector. | | |
| Outputs:
| - | 2 Master outputs on RCA connectors. |
| - | Symmetrical output with XLR connectors on master 1. |
| - | 1 Aux/FX-send output on RCA connectors. |
| - | 1 Record/aus/session output on RCA connectors. |
| - | 1 Strong head-phones output on JACK (6,35mm - 1/4 inch) and mini-JACK (3,2mm - 1/8 inch). | | |
| Control functions channels 1 and 2:
| - | Phono/line input select switch. |
| - | Channel 1-2 reverse switch. |
| - | Rotative level control per channel. |
| - | Triple tone control with short faders, for very fast manipulation of the audio spectrum (+10dB/-21dB). |
| - | Aux/FX-send push button for routing the signal via external effects-units. |
| - | Wet/dry fader to mix between signal without effect and signal with effect. |
| - | Short balance fader. |
| - | CUT-switches with very low operating force, placeable in 8 directions. Can be used in 3 modes: |
| Momentary cut |
| Latching cut |
| Double speed cut |
| - | Easy slide 45mm fader specially designed for high speed operating. |
| - | Channel fader reverse switch with LED indication at the front. |
| - | Channel fader curve control with potentiometer at front. |
| - | Easy slide digital optical long life time crossfader, with friction control screw and cut-in distance control screws, to fade between channel 1 and 2. |
| - | Crossfader reverse switch with LED indication at the front. |
| - | Crossfader curve control with potentiometer at front. |
| - | PFL channel 1 and 2 ON/OFF button |
| - | PFL select fader, to create a mixed signal of channel 1 and 2 in the headphones. | | |
| All volume- and curve-controls on channel 1 and 2 are done by a microcontroller controlled VCA. | |
| The channel-faders, cross-fader and cut-switches can easily be replaced via the top-panel after lifting of the scratchplate. | |
| Control functions channel 3:
| - | Mic/line input select switch. |
| - | Rotative level control. |
| - | 0dB LED to adjust the level. |
| - | Dual band equalizer with rotative potmeters. |
| - | PFL ON/OFF button. |
| - | Routing switch to route the signal to channel 1 or 2 or directly to the mix. |
| - | Short channel fader for fast operation. | | |
| Channel 4:
| |
| Soft touch rotative knobs for better grip on all rotative potmeters. | |
| Very smooth, extremely strong, metal plated matt chrome coloured knobs on all channel faders, cross fader and PFL-select fader. | |
| Mode switch to select mono or stereo operation of the mixing panel, ideal for working with records with different left and right tracks. | |
| Two master outputs with rotative volume control (also useable as monitor or booth output) | |
| Two bright VU-meters to show the levels of the inputs or mixed signal. | |
| Normal and upside down text print at the back panel to facilitate connection. | |
| Soft rubber anti-slide buttons at the bottom of the mixer. | |
| Power switch on the back of the panel, to avoid accidentally switching off the panel. | |
| External power supply, to reduce disturbances. | |
|
OPTIONS
|
| Optical high quality channel- or crossfader | |
| Digital session/aux/backtape input via RCA connector with level control at the back panel | |
| Digital record/aux/session output via RCA connector at the back panel | |
|
SPECIFICATIONS
|
 |
|
|
Inputs |
|
Input
sensitivity |
|
Signal /
Noise |
|
Remarks |
|
|
|
|
|
|
|
|
|
|
|
|
2xPHONO |
|
5.2mV/50kΩ |
|
< -80dB |
|
RIAA correction |
|
|
4xLINE |
|
500mV/50kΩ |
|
< -88dB |
|
|
|
|
1xMIC DJ assymm. |
|
8.0mV/1.2kΩ |
|
< -79dB |
|
Bass cut off filter |
|
|
1xMIC DJ symm. |
|
8.0mV/22kΩ |
|
< -79dB |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Outputs |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2xMaster assymm. |
|
775mV/10kΩ |
|
|
|
|
|
|
1xMaster symm. |
|
1.55V/600Ω |
|
|
|
|
|
|
1xAux/Session/Rec |
|
775mV/10kΩ |
|
|
|
|
|
|
1xPhones |
|
7.7V/600Ω |
|
|
|
Ph. 600Ω-2kΩ |
|
|
|
|
|
|
|
|
|
|
|
| |
| | |
| THD: <0.02% | |
| Tone controls:
| - | Bass +10dB/-21dB @ 100Hz |
| - | Mid +10dB/-21dB @ 1kHz |
| - | High +10dB/-21dB @ 10kHz |
| |
| Tone controls on Channel3:
| - | Bass +/-13dB @ 100Hz |
| - | High +/-13dB @ 10kHz |
| |
| Subsonic filter: -25dB @ 10Hz | |
| Power source:
| - | Standard with an AC-adapter of: 230V / 50Hz-60Hz |
| - | On request: 100V-117V / 50Hz-60Hz |
| |
| Power consumption:
| |
| Approbation: CE | |
| Dimensions:
| - | Front: 254mm x 400mm (10" x 9HE) |
| - | Chassis: 224mm x 398mm x 84mm (same height as Technics SL-1210 MKII) |
| |
| Weight: 4.07kg | |
|
|
|
|
|
|
|
